Dana 44 inner spindle bearing part number [Archive]

View Full Version : Dana 44 inner spindle bearing part number

Splashman

11-08-2006, 05:42 PM

I'm looking for the part number of the little needle bearing inside the spindle that the stub shaft rides on. A Timken part number would be best but I'm sure I can cross-reference another brand.

oppy

11-08-2006, 06:38 PM

I'm pretty sure the Timken # is B2110. There's a spindle kit # SBK1 listed which contains the seals too.

gremlinstien

11-08-2006, 06:52 PM

Oppy nailed it, I KNOW that SBK1 or sometimes just BK1 will get you all you need :cool:

Splashman

11-08-2006, 07:27 PM

there is suppose to be a seal :dunno:

guess I should get the kit then. Where do they sell the kits? At any old parts store?

gremlinstien

11-08-2006, 07:31 PM

A napa or bumper to bumper is where I usually get mine.

There are 2 seals, an inner that sits next to the bearing in the bore and a larger outer that fits on the shaft behind the spindle. Grease the crap out of everything when ya put it together. :cool:

Splashman

11-08-2006, 07:33 PM

this looks like it

http://cgi.ebay.com/ebaymotors/SPINDLE-BEARING-KIT-DANA-44-DANA-30_W0QQcmdZViewItemQQcategoryZ33731QQihZ019QQitemZ 7939453231QQrdZ1QQsspagenameZWD1V

My spindles only have one bearing between the 2 of them and no seals :lmao:

Splashman

11-08-2006, 07:34 PM

wow thats a fawkin rip off, $8 shipping. I'm going to Napa tomorrow.

gremlinstien

11-08-2006, 07:35 PM

That is it :cool:

oppy

11-08-2006, 08:14 PM

Parts America/Advance Auto website shows it for $14.44. Napa online has a kit for $7.49.

Splashman

11-08-2006, 08:16 PM

Parts America/Advance Auto website shows it for $14.44. Napa online has a kit for $7.49.

I saw the advanced price, thought it was a little steep.

Wilber

11-08-2006, 08:18 PM

you dont need that for low lock:shake:

Splashman

11-08-2006, 08:23 PM

without it I bet there is added stress on the hub, not to mention why not get it for $15... little extra security.

Jakey

11-08-2006, 08:26 PM

I've tried to get this stuff at advance already, yeah right, what a pia.

Splashman

11-08-2006, 08:36 PM

I've tried to get this stuff at advance already, yeah right, what a pia.

my point exactly. I was just going to go to my local bearing shop. I went there and got my wheel bearings and seals today, just didn't see the inner bearings until I cleaned of the 30 years of crud. Oh well, the bearings are useless without the seals, so I gota get everything.

stRanger

11-12-2006, 09:19 AM

I know Napa has it and think it is just BK1 in their comp... i wouldn't order from that ebay, from Napa it was only 10-15 i think! I spent 20 min going throught their books to find the damned thing one day